Polyester webbing slings are manufactured as per AS ME B30.9, IS-15041 & EN 1492-1 Standards with rated capacity upto30Tons. How to order polyester webbing slings: Width X Capacity X Effective length in Mtrs.
For example - 50 MM x2Tx 3 Mtr Means 50 MM Width, 2T Cap, 3 Mtr long.
He also provide various types of'anti Abrassive and cut resistant sleeves which improves the IiIV of polyester webbing slings by many times. Please re lie r our sleeves / protectors catalogue for the same.

Synthetic Sling Inspection

All of our synthetic slings products are designed for long life under punishing conditions, but they will eventually wear out after extended use. The key is to knowing when to replace them, and that's why it's very important to inspect your slings on a regular basis.

Type Of Inspection:

1. Initial Inspection : Before any new or repaired sling is placed in services, it shall be inspected by a designated person to ensure that the correct sling is being used as well as determine that the sling meets applicable specifications and has not been damaged in shipment.

2. Frequent Inspection: This inspection shall be made by the user handling the slings each time it is used.

3. Periodic Inspection : The frequency of inspection depends on three important factors:

   • Sling usage - the more you use a sling, the more you need to inspect it.

   • The working environment - the harsher the conditions, the more often you need to inspect.

   • Sling service life - based on your experience in using slings.

POLYESTER MULTILEG SLINGS

Our multi-leg slings are manufactured with either Hal webbing slings or with round slings in combination with high quality steel components like master link assemblies, bow shackles and different variety of eye hooks. They are manufactured according to EN 1492-1 OR ASMF.R30.9il the textile pan is a webbing sling or according to FN 1492-2 if the textile part is a round sling. The textile part of the multi-leg sling has a safety factor of 7:1 OR 5:1 and the metal part has a safety factor of 4; I.

Multi-leg slings can be manufactured in different assemblies having two legged, three legged or four legged slings. They can have different combination of hooks like, eye hook, self locking hook, hook with latches, etc. at the lower end of the slings. They can have different combination of hooks like, eye hook, self locking hook, hook with latches, etc. at the lower end of the sling to suit different lifting applications. Textile Multi-leg slings are easy to use and provide many advantages over other multi-leg slings ;

• Easier lo handle as compared lo wire rope or chain.

• The total weight of the assembly is less

• Master link creates sufficient space on the crane hook.

• Round slings can be rotated lo have different bearing points thus resulting in uniform wear.

• Proper and even distribution of load

Customised Multilcg Slings Can Also He Manufactured Upon Request.

BAG / ZOLA TYPE SLINGS :

We manufacture Bag Slings in any length as per customers requirement. These are special type of slings used for lifting products requiring wider support / holding while lifting. These slings provide wide contact to surface area of the product for minimum slippage and even distribution of load on to sling while lifting.

Customised Bag Slings Can Also Be Manufactured Upon Request.

Inspection Records

Written inspection records, utilizing the identification for each polyester round sling as established by the user, should be kept on tile. These records should show a description of the new polyester round sling and its condition on each periodic inspection.

Repair of Round Slings

There shall be no repairs of load bearing fibers. Repairs to the protective covers shall be done only by the original manufacturer or their appointed agent. Only polyester round slings, which can be identified from the information on the identification tag, shall be repaired.

All repaired polyester round slings shall be proof tested to a minimum of two (2) times the rated capacity before being put back into ser ice. Certification of proof test should be provided.

Removal Criteria For Round Slings

• Acid or caustic bums.

• Missing or illegible tag

• Evidence of heat damage. Melting or charring of any part of the sling.

• Holes, tears, cuts, snag or embedded articles.

• Broken or worn stitching in cover exposing core yarn.

• Excessive abrasive wear, broken or damaged core yarns.

• Knots in any part of the sling.

• Distortion, brittle or stiff area on any part of the sling which may indicate chemical, heal or ultraviolet / sunlight damages.

• Excessive pitting or corrosion, or cracked, distorted or broken fittings.

• Other visible damage that causes doubt as to the strength of the sling.